Yunnan Longyu Lifting Machinery Co., Ltd.

The main structure of the guide rail elevator mainly includes three parts: the lifting device, the guide rail device and the belt changing device. The lifting device is the lifting table car. The guide rail device mainly plays a traction role to make the equipment run more smoothly according to regulations. The belt changing device is the It is used to switch tracks when the elevator needs to pass through the door. The internal structure of the lifting device mainly consists of gear mechanism, bracket, worm gear, guide mechanism, boom, upper and lower shells, etc. Gear mechanism The gear mechanism mainly includes large and small gears, a pulley, a central shaft, and a safety device composed of a stop buckle and a torsion spring. The hydraulic system consists of anti-fall, interactive interlocking of upper and lower doors, which can realize multi-floor control. It is also equipped with safety devices such as overflow valves, manual pumps, and pipeline rupture valves, which greatly guarantees the safety performance of the equipment. For the tabletop design of the guide rail lift, the tabletop is made of anti-slip patterned steel plate, which is flat, non-slip and durable.
It is mainly used for transporting goods up and down between various working floors, in three-dimensional garages and between two floors of underground garages, in places where pits cannot be excavated, and in places where the top height cannot reach the required height. Jinan Niu Li Machinery Manufacturing Co., Ltd. will wholeheartedly build an efficient delivery platform for you. The hydraulic system of the product is equipped with anti-falling and interactive interlocking of upper and lower doors. Operation buttons can be set on each floor to achieve multi-point control. The product has a solid structure, large carrying capacity, stable lifting, simple and convenient installation and maintenance. It is an ideal cargo transportation equipment that is economical and practical and can replace elevators between low floors. According to the installation environment and usage requirements of the lifting platform, you can choose different optional configurations to achieve better usage results.
The single guide rail freight elevator is mainly used for high-altitude cargo transportation between floors. It is mainly used in environments with light load capacity and relatively small table size requirements. It has a load capacity of tons and a lifting height of meters. It can be installed indoors and outdoors. The single rail lifting freight elevator is also called a hydraulic hoist.
, high lifting height, using side cylinder, smooth operation, low noise, easy maintenance, long service life
, manual emergency descent can be used during power outage, safe, convenient, fast and practical
/> , The depth of the pit is generally 1, and the height of the top floor is not limited. It can be customized according to the site environment
. It is suitable for layered steel structures or concrete factory buildings, and can be used both inside and outside
. The pump station adopts a joint venture pump station And imported pump stations from Italy. If the speed requirement is too high, a joint venture customized pump station will be used to meet the ideal delivery requirements.
Imported parts, oil cylinders and seals are used to solve the problem of unstable oil pressure and oil leakage of parts for customers. Problem,
, the oil cylinder is built into the platform
, heavy-duty wire rope pulley or weighted special chain ensures safety
, automatic insurance during the rising process ensures vehicle safety
, synchronization device during rising ensures vehicle safety No possibility of overturning
, alarm setting before lowering to the ground to ensure operator safety
, chain or wire rope breakage protection device
, hydraulic system pressure loss and explosion-proof protection device
, selection of elevators Special leveling permanent magnet switch, good leveling effect.
, The distance between heavy load and no-load is small, the leveling accuracy is high and easy to adjust
, Standard elevator control panel, LCD display call box, related wiring harness and connectors are selected. It has a beautiful appearance and is easy to operate. It visually displays the floor location of the car. The wiring harness is connected by connectors. There are automatic and manual controls.
, safe voltage control
, using rolling guide shoes, high precision, anti-wear, smooth lifting.
There is no need for a machine room above the shaft.
, No counterweight device is provided to improve the utilization rate of the hoistway area.
The load and carrying capacity are directly applied to the foundation pit through the oil cylinder. The strength requirements of the shaft are low, and the brick structure or brick-concrete structure shaft is sufficient.
The overflow valve can prevent the system pressure from being too high during upward movement.
When the power supply of the emergency manual valve fails, the elevator can be lowered to the nearest floor to open the door in an emergency.
. Pipe rupture valve. When the hydraulic system pipeline ruptures and the elevator stalls and descends, it can automatically cut off the oil line to stop the descent.
. Fuel tank oil temperature protection. When the oil temperature in the fuel tank exceeds the standard set value, the oil temperature protection device generates a signal and suspends the use of the elevator. When the oil temperature drops, the elevator can be started.
. Low failure rate. Due to the use of advanced hydraulic systems and good control methods, the failure rate of the elevator can be minimized.
. Low power consumption. When the hydraulic lift goes down, it is driven by the pressure generated by its own weight, which greatly saves energy.
There is no need for a machine room above the shaft, and the top floor can be installed with a height of more than 1.3 meters.
. The machine room can be located within a radius of 1 meter of the shaft, occupying an area of only square meters.
, No counterweight device is provided, which improves the utilization rate of the shaft area.
The load and load are directly applied to the foundation pit through the oil cylinder. The strength requirements of the shaft are low, and the brick structure or brick-concrete structure shaft is sufficient.
Kunming Longyu Lifting Machinery Manufacturing Co., Ltd. has a registered capital of RMB 10,000. The company is the first in the industry to obtain the national special equipment production license, and has obtained the special equipment form test certificate from the National Hoisting and Transportation Machinery Quality Supervision and Inspection Center. Special equipment The production license has the largest permitted production range in China. The maximum load capacity of the mobile model is up to tons, and the maximum load capacity of the fixed model is up to tons. This unit is the first company in the industry to obtain EU certification. All the company's products have passed the quality system certification and are certified by China Ping An Insurance Company. Underwriting product quality insurance, our company is the first domestic manufacturer in the same industry to have export qualifications.